The InteliBifuel INCON 6 is a key component within the BiFuel solution that enables a new approach for introducing substitute fuel into an internal combustion engine with improved precision – Multiple Point Injection (MPI). This method ensures that fuel is injected into the suction manifold directly in front of each cylinder, optimising both emissions and efficiency.

The InteliBifuel INCON 6 offers: 

• The ability to control 6 injectors.
• The ability to control a wide variety of injectors. 
• Easy installation, with injection timing based on speed calculations from the crankshaft and camshaft, as well as their synchronization.
• Adjustable controlled PWM frequency from 300Hz up to 15kHz
• Enables a various methods for synchronizing existing signal waveforms with synchronization pulses.
• A wide range of output control voltages for injectors, from 12VDC to 60VDC.
• Suitable for conversion of up to 24 cylinders.
• An RPM engine range between 375-2200 RPM.
• Compatibility with ComAp's InteliBifuel Mobile Control Unit. 
• Compatibility with ComAp's EMIL 75/125 injection valves.
• Manuel temperature correction of individual cylinders.
• Automatic temperature correction of individual cylinders.
• Automatic knocking correction of of individual cylinders.
• Injector current diagnostics.
• Internal diagnostics, including open circuit, short cut, loss of communication, RPM and CAM loss.
• Possibility to use different combinations of InteliBifuel Incon 6 and Incon 12 units to achieve optimal performance for various engine models and application requirements.