InteliLite 4 Remote Display (SW) is a remote display software for InteliLite 4 controllers, acting as both remote display and controller. The remote display provides the same controls and shows the same gen-set related data as the InteliLite 4 single-gen set controllers.
 

Easy to install, configure and use, the InteliVision 18Touch G2 provides comprehensive overview and monitoring of your complex installations. A new generation of our InteliVision 18Touch, this display will support your control and monitoring needs for sites with multiple controllers and complex installations, such as CHP or Hybrid that need to monitor a large number of values.  The product comes with embedded InteliSCADA software, ComAp's PC monitoring and management tool, enabling easy screen configuration, history check and change of setpoints from a single location.
 

InteliVision 13Touch is a high-quality and easy-to-use 13.3" marine-certified panel PC with multi-controller support and buttons for brightness change on its front face. Developed for simultaneous monitoring and control of up to four controllers, the InteliVision 13Touch is flexible and simple to configure to suit your monitoring needs. 
 

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch is an industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control single gen-sets for various applications.  
 

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch OEM is a marine-certified industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control multiple gen-sets and engines for various applications.  

 

Intuitive and easy to use, the InteliVision 10Touch is a high-quality PC panel designed for a broad range of ComAp’s paralleling and single gen-set controllers for various applications. This 10.1” multi-touch display comes with embedded InteliScada display, our signature PC monitoring tool, enabling easy monitoring and simple screen configuration to meet your needs. 

 

InteliVision 5.2 Marine is an easy-to-use remote colour display for ComAp marine controllers, for monitoring and control of various marine applications. This intuitive plug&play solution provides comprehensive visual overview of all application data, monitoring information and trend history. The display is marine certified.
 

InteliVision 8, industrial operator panel equipped with 8” colour screen, is designed to support the monitoring and control of single gen-sets’ operations for various applications. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 is intended for the ComAp InteliGen NT, InteSys NT, InteliMains and InteliDrive family of controllers. 
 

InteliVision 8 Marine is an industrial operator panel equipped with 8” colour screen, certified for use in the marine industry to support the monitoring and control of single gen-sets’ operations. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 Marine is intended for the ComAp InteliGen NT, InteSys NT, and InteliDrive family of controllers. 
 

L'InteliMains 1010 est le contrôleur de supervision réseau /disjoncteur de couplage ComAp le plus avancé pour les applications complexes. Conçu selon les normes de sécurité informatique les plus strictes pour protéger vos opérations, l'InteliMains 1010 fait office de relais pour la protection du réseau et aide à synchroniser vos groupes électrogènes avec le réseau pour les applications de commutation et les installations d'infrastructures critiques, telles que les centres de données, les hôpitaux ou les banques.

L'InteliMains 1010 SC est conçu pour les points de connexion des réseaux et des disjoncteurs de couplage pour les applications de mise en parallèle complexes afin d'assurer la synchronisation du système, le contrôle de la charge. Ce contrôleur est destiné aux applications où le contrôle du système est piloté soit par les interrupteurs du panneau, soit par un dispositif de niveau supérieur tel qu'un automate programmable du système. L'InteliMains 1010 SC peut également être programmé pour augmenter le niveau de protection électrique du système. Cet appareil est simple à configurer et à utiliser, ce qui réduit les temps d'ingénierie et de mise en service.

InteliMains 510 est un contrôleur de supervision du réseau utilisé pour synchroniser un ensemble de groupes électrogènes avec le réseau ou un disjoncteur de couplage. Il est principalement destiné à l'appareil de commutation et vise des applications avancées et plus complexes.

 

InteliMains 210 G2 est le contrôleur de supervision du réseau utilisé pour synchroniser un ensemble de groupes électrogènes avec les opérations du disjoncteur de réseau ou du disjoncteur de couplage, principalement destiné aux applications d'appareils de commutation standard.

InteliMains 210 est un contrôleur de supervision de réseau sécurisé pour la synchronisation de groupes électrogènes avec la source de réseau. Le contrôleur peut également être utilisé pour le fonctionnement du disjoncteur de couplage et est compatible avec les appareils de commutation et les applications standard.
 

InteliMains NT BaseBox is a Mains/Utility/Tie-breaker supervison controller base unit. Acting as the Mains protection relay, the InteliMains NT BaseBox synchronises sets of gen-sets to the Mains/Utility and it is primarily intended for switchgear applications and complex, critical infrastructure installations, such as datacentres, hospitals or banks. This product is an earlier generation of the InteliMains 1010 controller. 
 

Designed with a built-in display, the InteliMains NT GC is a mains/utility/tie-breaker supervision controller. Acting as a mains protection relay, the InteliMains NT GC can synchronise set of gen-sets connected to the Mains/Utility source. The controller is intended primarily for switchgear applications.
 

InteliMains NTC BaseBox is a Mains/Utility/Tie-breaker protection and supervision controller with extensive communication capabilities. Acting as a Mains protection relay, the InteliMains NTC BaseBox synchronises sets of gen-sets to the Mains/Utility source. This product is an earlier generation of the InteliMains 1010 controller and it is intended for switchgear applications and complex, critical infrastructure installations, such as datacentres, hospitals or banks.
 

This cellular router enables one or multiple ComAp controllers equipped with Ethernet interface to be able to communicate remotely via internet and access cloud services like WebSupervisor. 
 

An easy-to-use and highly efficient solution for connecting gen-set controllers online via 4G network. Enables remote monitoring and tracking of the gen-set’s exact position, helping to optimise its uptime and reduce maintenance costs.
 

An easy-to-use communication solution to help connect gen-set controllers online via wired connection. This plug-in communication module enables remote monitoring and control for the gen-set controllers and provides access to various gen-set values - engine values, generator, load and Mains electrical values - alarms and history from anywhere. 
 

An easy-to-use and highly efficient solution for connecting gen-set controllers online via 4G network. Enables remote monitoring and tracking of the gen-set’s exact position, helping to optimise its uptime and reduce maintenance costs.
 

An easy-to-use communication solution to help connect gen-set controllers online via wired connection. This plug-in communication module enables remote monitoring and control for the gen-set controllers and provides access to various gen-set values - engine values, generator, load and Mains electrical values - alarms and history from anywhere. 
 

This cellular router enables one or multiple ComAp controllers equipped with Ethernet interface to be able to communicate remotely via internet and access cloud services like WebSupervisor. 
 

An easy-to-use communication solution to help connect single and paralleling gen-set controllers online via GPRS and GSM communication. 
 

Communication module enabling integration of genset controller into the local monitoring system over Modbus RTU and a quick connection to ComAp software tools for configuration and monitoring InteliConfig and InteliSCADA. 
 

InteliGateway 301 is a versatile gateway module that seamlessly connects multiple Modbus devices to ComAp’s WebSupervisor and InteliScada monitoring systems, as well as to ComAp's controllers. This gateway product is enhanced with new features such as 4G cellular connectivity and GNSS capability. 

 

The EM-ACV3PH is a plug-in extension module for ComAp’s control units with listed support. This module adds an additional three-phase AC voltage sensing set. It operates only in control units with declared support.

Advanced dual voltage battery charger 12V/6A or 24V/5A with charging fail relay.

The InteliCharger 120 12-24 is an advanced, automatic, multi-stage battery charger suited to meet the most advanced requirements of battery manufacturers. The real time auto-diagnostic system monitors battery faults such as cells in short circuit, accidental reverse polarity connection, disconnection of the battery. The charger is convenient for Open Lead Acid, Sealed Lead Acid, Gel and NiCd–NiMH battery types. It can be also used in power supply mode. A rugged casing with bracket for DIN rail mounting provides IP20 protection degree.
 

Automatic battery charger 24V / 3A with charging fail relay.

The InteliCharger 72 24 is an advanced, automatic, multi-stage battery charger suited to meet the most advanced requirements of battery manufacturers in a cost effective package. The charger's auto-diagnostic system monitors battery faults such as cells in short circuit, accidental reverse polarity connection and disconnection of the battery. The InteliCharger 72 24 is convenient for Open Lead Acid, Sealed Lead Acid, Gel and NiCd–NiMH battery types. It can also be used in power supply mode.

 

Automatic battery charger 12V / 5A with charging fail relay.

The InteliCharger 60 12 is an advanced, automatic, multi-stage battery charger suited to meet the most advanced requirements of battery manufacturers in a cost effective package. The charger's auto-diagnostic system monitors battery faults such as cells in short circuit, accidental reverse polarity connection, disconnection of the battery. The InteliCharger 60 12 is convenient for Open Lead Acid, Sealed Lead Acid, Gel and NiCd–NiMH battery types. It can also be used in power supply mode.

Gasket accessory for InteliNano AMF 5. This optional Gasket IN2 ensures IP65 protection when the controller is panel-mounted. 
 

The InteliCharger 120 12-24 CAN is an advanced, automatic, multi-stage battery charger using “Switched mode technology” and “Battery care technology”, suited to meet the most advanced requirements of battery manufacturers. With a built-in CAN Bus communication feature, using the InteliCharger 120 12-24 CAN one can monitor battery voltage, charging current and protections such as cell in short-circuit, low battery voltage to detect possible battery abnormalities. The product is suitable for gen-set OEMs, switchgear markets and OEM packagers, system integrators and panel builders. 

 

The Gas Train is designed to reduce pressure and to control the flow rate of natural gas flowing into the combustion engine. It is suitable mainly for bi-fuel conversions as a part of the bi-fuel solution. 
 

Inteli DC4/4 is an extension module, type transducer, equipped with analog inputs and analog outputs. The module can be used with various types of controllers, purposed for applications where we need to precisely measure the direct voltage and direct current (DC Voltage, DC Current). 

The specific Inteli DC4/4 accessory is not UL certified. The UL certified version will be available shortly. 
 

Inteli DC4/4 is an extension module, type transducer, equipped with analog inputs and analog outputs. The module can be used with various types of controllers, purposed for applications where we need to precisely measure the direct voltage and direct current (DC Voltage, DC Current).