InteliCharger 120 12-24 CAN

Order code: BC1CAN5ABOB

The InteliCharger 120 12-24 CAN is an advanced, automatic, multi-stage battery charger using “Switched mode technology” and “Battery care technology”, suited to meet the most advanced requirements of battery manufacturers. With a built-in CAN Bus communication feature, using the InteliCharger 120 12-24 CAN one can monitor battery voltage, charging current and protections such as cell in short-circuit, low battery voltage to detect possible battery abnormalities. The product is suitable for gen-set OEMs, switchgear markets and OEM packagers, system integrators and panel builders.

CAN output according to J1939 protocol
Battery charging output 24 V: 1–5 A, 12 V: 1.2–6 A
Automatic battery status diagnosis
Four charging stages: Recovery, Boost, Absorption and Float
Power Supply mode

Product certifications: UL1236, IEC/EN 62368, 89/336/EEC, DIN41773, IEC/EN 60335-2-29, EN60950/UL1950, IEC 61000-6-3, IEC 61000-6-2. CE

English (7 Feb 2024)

Show resource hub for this product

Overview

Overview

The InteliCharger 120 12-24 CAN is designed following the battery care concept. This concept is based on algorithms that implement automatic battery charging, battery life optimisation, flat batteries recovery and real time diagnosis. The real time auto-diagnostic system monitors battery faults such as cells in short circuit, accidental reverse polarity connection, disconnection of the battery. These faults can be easily detected and fixed using a blink code for diagnostic LED during the charger installation and operation.

The charger is suited for all battery types. Using the jumper setting, one can change the parameters of the charging curve for: Open Lead Acid, Sealed Lead Acid, Gel and NiCd–NiMH battery type. It has a robust case with bracket for DIN rail mounting, and it is protected in line with the IP20 protection degree.

The InteliCharger 120 12-24 CAN offers:

CAN output according to the J1939
Battery charging output 24 V: 1–5 A, 12 V: 1.2–6 A
Suitable for the following battery types: Lead Acid, AGM, Gel and NiCd
Automatic battery status diagnosis
Four charging stages: Recovery, Boost, Absorption and Float
Power Supply mode
High efficiency (≥ 90 %)
Protected against short circuit, reversed polarity, disconnection of battery
Signal output terminal (voltage free contact) for discharged or damaged battery, or signalisation for charging fail
IP20 protection
DIN rail mounting

Local support you can count on

Your operation depends on everything running smoothly. Our experts are here to make sure of that. We offer:

24-hour support on working days
Local contacts in 179 countries
Remote and in-person trainings and a range of support materials
Expert consultation, troubleshooting, and much more

CONTACT TECHNICAL SUPPORT

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

See Local Contacts

Interested in another country? Find your local representative.

You might also need

InteliGen 1000

InteliGen 1000 is the most advanced ComAp gen-set controller for multiple gen-sets with paralleling operations, with or without connection to the mains or other source. Intended primarily for switchgear applications, this high-end controller will help you control and monitor demanding projects with critical infrastructures such as datacentres, hospitals and banks.

InteliGen 500 G2

InteliGen 500 G2 is a paralleling controller with 5" colour display for advanced and more complex diesel gen-set applications, supporting both single and multiple gen-sets running in grid-tied or island operations.

InteliGen4 200

InteliGen4 200 is a diesel gen-set control unit for common paralleling applications supporting both single and multiple gen-sets running in grid-tied or island operations.

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly.. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .