InteliGen NTC

InteliGen NTC

Order code: IG-NTC GC, IG-NTC LT GC

New version of this product is available. Check out its successor, InteliGen 500 G2

Upcoming training: 26.2.2025. Find out more.

InteliGen NTC GC is a controller with a broad range of communication capabilities for single or multiple diesel gen-sets operating in stand-by or parallel mode. This product will help you ensure the back-up power for medium sized sites, as well as rental applications. The InteliGen NTC GC is an earlier generation of our InteliGen 500 G2 controller.

This controller also has a certified version for marine applications. Learn more: InteliGen NTC GeCon Marine

Built-in PLC interpreter
Controller redundancy
Remote connection & monitoring
Built-in display
User defined protections and setpoints
True RMS measurement

InteliGenNTC GC Datasheet

English (13 Jun 2023)

English 13 Jun 2023

Chinese 13 Jun 2023

Manuals

16 files

English (31 Oct 2024)

English (25 Jan 2023)

English (5 Sep 2024)

English (2 Oct 2023)

English (7 Oct 2024)

English (25 Jan 2023)

English (30 Nov 2023)

English (16 Oct 2024)

English (25 Jan 2023)

English (16 Oct 2024)

English (25 Jan 2023)

Software

9 files

English (5 Sep 2024)

English (13 Jun 2023)

English (28 Jun 2024)

English (25 Jan 2023)

English (11 Oct 2024)

English (15 Oct 2024)

English (11 Oct 2024)

English (20 Oct 2023)

Certifications

10 files

CE for IG-IS-IM Controllers

English (3 Feb 2023)

CRS_Certificate_IGSM_03-001887_2026

English (25 Jan 2023)

IGS-NT Marine Certificate of Design Assessment of American Bureau of Shipping (ABS)

English (25 Jan 2023)

IGS-NT Marine Type Approval Certificate Bureau Veritas

English (25 Jan 2023)

IGS-NT Marine Type Approval Certificate Lloyds Register (LR)

English (25 Jan 2023)

IGS-NT Marine Type Approval Certificate of Det Norske Veritas Germanischer Lloyd (DNV-GL)

English (25 Jan 2023)

Korean Register Marine Type Approval Certificate

English (25 Jan 2023)

Marine Type approvals with products

English (19 May 2023)

UKCA InteliGen NT GC Declaration of Conformity v1

English (25 Jan 2023)

Brochures

2 files

English (25 Jan 2023)

Make Your Equipment Less Remote

English (25 Jan 2023)

Spanish 25 Jan 2023

English 25 Jan 2023

Show resource hub for this product

Overview
Related products
Resources
Trainings

Overview
Related products
Resources
Trainings

InteliGen NTC

Control your operations safely and easily with our InteliGen NTC GC controller, ensuring greater safety, user protection and minimal downtime.The InteliGen NTC GC offers:

AirGateComAp’s controllers incorporate AirGate connection technology to make access to the internet as simple as possible. AirGate enables our controllers to connect to the internet using the existing network infrastructure, negotiating firewalls and VPN systems and removing the requirement for static and public IP addresses. 2.0 for easy connection to your equipment remotely, without worrying about your asset’s IP address
Built-in PLC ComAp has integrated Programable Logic Controller tightly with our standard line of controllers. This helps our customers to cut costs, minimise points of failure for advanced systems, and overcome any challenge that may occur.interpreter with the use of ComAp's free PLC Editor
User-defined protections and setpoints on top of default protection
Controller redundancyRedundancy in critical backup power systems is essential to ensure that the power is never compromised. Our controllers allow for installing a second controller to continuously monitor for potential failure. minimising solution downtime and ensuring the power isn’t compromised
Clear visualisation and overview of all important information on the built-in display
More precise measuring with a True Root Mean Square measurement feature
Remote control and monitoring of your gen-set operations with WebSupervisor, our cloud-based fleet management tool
Compatible load/Var sharing and power management Our system allows for up to 32 generators running in parallel, regardless of whether the generators are of different sizes, power outputs, and from different manufactures. The system is highly adaptive and can create up to 4 different schemes of power management that can be switched with a simple switch. with other ComAp solutions*
Droop regulation allowing load and Var sharing when the inter-controller’s communication is lost
Start-up synchronisationComAp’s Start-up synchronisation eliminates any blackout time, and the start-up time is the same for sites running 2, 10, or even 30 gen-sets. To avoid delaying availability of the system due to slow-starting generators or other problems, any engines that fail to reach running speed with a specified time are rejected from the scheme and, if able, are left to perform traditional synchronising after the majority of sets have become available. to minimise the paralleling start sequence time and get the gen-set system up and running with the minimum possible delay
Dynamic spinning reserveDynamic Spinning Reserve allows the system to react flexibly to changes in power produced by renewable energy sources. ComAp controllers can react to requested spinning reserve and keep the sufficient amount of gen-sets running to cover the drop-in output of the renewable source (e.g. when cloud cover is heavier). helping to deliver maximum amount of available energy from photovoltaics **
Faster and cost-effective operations with signal sharing over a CAN bus across a group of control units
Possibility to have a mains application in a gen-set controller with firmware upload functions
Event-based history for fast and easy troubleshooting
Automatic Mains Failure that ensures automatic start of gen-sets and minimises downtime
Peak shaving for limiting the import from the mains (e.g., due to higher prices)
Load shedding ensuring the most important loads are running even when there is a lack of power
Compatible with the following remote displays

* Feature available with a hardware dongle.

** Feature available with a software key.

Accessories

IGS-PTM

Analogue/binary Input/Output module.

IGL-RA15

Upgraded version of Remote Annunciator with new ComAp design and full NFPA 110 compliance. Designed as an extension signaling unit for ComAp products.

GenConfig

GenConfig is an intuitive software tool that enables quick and effective configuration and programming of IG/IS-NT controllers.

I-AOUT8

Analogue output module.

I-CR

CAN repeater module for inter-controller CAN, helping to increase controller communication reliability on sites with large footprint.

I-CB/CAT GAS

ECU serial communication interface for Caterpillar Gas engines, equipped with EMCP2 controller and CCM or PL1000 communication module. This product supports ComAp’s InteliGen NT, InteliSys NT and Drive controllers to control and monitor Caterpillar’s Gas engines.

Inteli IO8/8

Binary Inputs/Outputs and analogue Outputs module.

I-LB+

Communication bridge for local monitoring and control of multiple controllers. This module enables easy and smooth commissioning and maintenance of a group of gen-set controllers by linking data from all controllers into the configuration/monitoring software tool.

InternetBridge-NT 4G

Communication module for internet connection to one or more controllers. This module enables remote communication for asset monitoring via both wired and wireless connection.

I-CB/CAT DIESEL

ECU serial communication interface for Caterpillar Diesel engines equipped with EMCP2 controller and CCM or PL1000 communication module. This product supports ComAp’s InteliGen NT, InteliSys NT and Drive controllers to control and monitor Caterpillar Diesel engines.

IG-MTU

Mains Transformer Unit.

IGS-NT-LSM+PMS

Hardware key for Load Sharing and Power Management.

InteliVision 8

InteliVision 8, industrial operator panel equipped with 8” colour screen, is designed to support the monitoring and control of single gen-sets’ operations for various applications. A simple and easy-to-use plug&play solution, it provides comprehensive overview of all engine data, monitoring information and trend history. The InteliVision 8 is intended for the ComAp InteliGen NT, InteSys NT, InteliMains and InteliDrive family of controllers.

I-RB8

8-Relay board for ComAp controllers.

NT-Converter

Load sharing interface module.

Inteli AIO9/1

Analogue Input/Output module.

I-CB/Deutz TEME

ECU communication interface for MWM (former Deutz) engines equipped with TEMevolution ECUs. This product supports ComAp’s InteliGen NT, InteliSys NT and Drive controllers to control and monitor MWM engines.

I-CR-R

CAN redundancy module for inter-controller CAN, helping to increase controller communication reliability on sites with large footprint.

IG-AVRi-TRANS/LV

Power Supply Transformer for IG-AVRi module.

I-LBA

Low battery adaptor to support controller operation during battery voltage dips.

InteliVision 5

InteliVision 5 is an easy-to-use industrial operator panel with a colour screen for monitoring of single gen-set for various applications. This robust and intuitive plug&play solution provides comprehensive visual overview of all engine data, monitoring information and trend history.

InteliVision 12Touch OEM

Intuitive, easy-to-use and simple to configure, the InteliVision 12Touch OEM is a marine-certified industrial operator panel equipped with 12.1” colour, multi-touch screen. Compatible with the majority of ComAp’s controllers, it provides comprehensive visual overview to monitor and control multiple gen-sets and engines for various applications.

IG-AVRi

AVR control Interface for paralleling genset controllers.

IG-MTU-2-1

Mains Transformer Unit.

IS-AIN8

Analogue input module.

Inteli AIN8TC

Peripheral module, extension module - 8 thermocouples inputs.

WinScope

WinScope is a high-performance PC tool used for monitoring and archiving trends. The tool enables quick and easy adjusting of setpoints to achieve optimal functionality and maximum performance of your gen-set. WinScope 1000 is available and can work in demo mode, free basic mode or paid advanced version, which can monitor up to 32 controllers and channels. WinScope 1000 is the newest generation of our WinScope tool.

I-CB/MTU

ECU communication interface for MTU engines with ADEC and MDEC ECUs.

I-RB16

16 Relay board.

IS-BIN16/8

Binary Input/Output module.

Inteli AIN8

Module with 8 analogue Input channels and 1 RPM/Impulse Input.

InteliMonitor

InteliMonitor is an online monitoring and controlling software tool for ComAp devices and accessories that can be used for unlimited number of sites. The tool provides auto-generated SCADA to help you gain detailed overview of your site and gen-set operations.

WebSupervisor

WebSupervisor is a cloud-based system designed for monitoring, data analysing and management of ComAp and third-party devices. It provides you with an easy overview of all your devices, their operational status, location and other important data, and alerts you in case of potential issues. Using its powerful reporting and analysis tools, you can optimise the revenue for your gen-set fleet, minimise downtime and reduce maintenance costs.

Related products

InteliSys NTC BaseBox

InteliSys NTC BaseBox is a controller with a broad range of communication and PLC capabilities for single or multiple gen-sets operating in stand-by or parallel mode. Intended primarily for CHP and switchgear applications, it will help you with secure on-site and remote monitoring of various installations such micro CHP, datacentres, hospitals or banks.

InteliCompact NT MINT

Gen-set controller for gen-sets in multiple parallel applications.

InteliGen 200

InteliGen 200 is a gen-set control unit for common paralleling applications, supporting both single and multiple gensets running in grid-tied or island operations.

InteliGen NT

InteliGen NT GC is a controller for single or multiple diesel gen-sets operating in stand-by or parallel mode. This controller will help you control, monitor and ensure the back-up power for medium sized sites, as well as rental applications. The InteliGen NT GC is an earlier generation controller of our InteliGen 500 G2.

InteliGen NTC BaseBox

InteliGen NTC BaseBox is a controller with a broad range of communication capabilities for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure on-site and remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NTC BaseBox is one of the earlier versions of our advanced controller InteliGen 1000.

InteliGen NT BaseBox

InteliGen NT BaseBox is a controller for single or multiple diesel gen-sets operating in stand-by or parallel mode. Intended primarily for switchgear applications, this controller will ensure secure remote monitoring of your critical infrastructure installations such as datacentres, hospitals or banks. The InteliGen NT BaseBox is an earlier generation controller of our advanced InteliGen 1000.

InteliGen 500

InteliGen 500 is a paralleling controller with 5" colour display for advanced diesel gen-set applications, supporting both single and multiple gen-sets running in grid-tied or island operations.

Substitute of

InteliGen 500 G2

InteliGen 500 G2 is a paralleling controller with 5" colour display for advanced and more complex diesel gen-set applications, supporting both single and multiple gen-sets running in grid-tied or island operations.

Frequently Asked Questions

Show all

Can I unlock my controller?

If you have forgotten your controller password, it can be found using the password decode function.

You will need the following information about your device:

serial number
"password decode" number

Both numbers can be obtained through the monitoring software relevant to the device.

Serial number is available in Controller info
Password decode number is available in Values / Info

You can also show these numbers on your device's display. Typically, this requires a sequence or combination of buttons to be pressed. Details can be found typically in the device Operator guide.

Once you have these numbers, please contact your ComAp distributor and they will help you get your password back.

I cannot program my controller, it looks dead. How do I restore a controller with broken firmware?

The controller firmware does not usually break by itself however it can be damaged during controller programming, typically if power is lost during the process. If there does not seem to be a hardware issue with the controller there is an option to restore the controller using a process called ‘Boot Jumper’ programming.

This can be described as a sequence of steps you need to perform to allow the configuration tool to write new firmware into the device.

The steps typically are:

Physically connect the controller to your PC.
Power the controller on and initiate connection and firmware programming from the software tool menu.
The software will ask you to switch the device off, close the Boot Jumper and switch the device back on.
The programming will then proceed and you will receive further instructions during the process.

The boot jumper can be found either on the communication module (where plug-in modules are used) or on the device itself, typically under a rubber grommet, next to the dongle slot.

The description above is not enough? Try our Booot jumper training video.

How do I connect to my ComAp controller? What types of connections are supported?

ComAp offers a wide range of options to connect to your controller:

RS232 / RS485
USB - USB A<->B (usually a printer cable)
Internet connection - LAN, GPRS, 3G, 4G

Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT).

Each ComAp device usually allows for multiple ways of connection. The simplest one supported by the majority of our devices is the RS232 (serial) connection. For this, you need an RS232 cable (null modem) and if your PC is not equipped with an RS232 port you need a USB<->RS232 converter.
USB connections are very common. Almost all ComAp devices support connection using simple USB A<->B cable (printer cable) for easy configuration. Some devices can be powered from the USB port for programming to allow easy configuration right on your desk.
Other connection types: Internet connection (LAN, GPRS, 3G, 4G), Modbus RTU, Modbus TCP, SNMP, AirGate, Modem.
Note that some connection types require you to use a communication module (plug-in eg a RS232 card) or communication bridge (external device eg Internet Bridge NT). Not all types of connection are possible on each device. You can find all the details related to this topic in your device's Comprehensive guide or Communication guide.

Detailed information about connection to:
InteliLite NT, InteliATS NT, InteliCompact NT is available IL-NT, IA-NT, IC-NT Communication Guide (page 21)
InteliGen-NT, InteliSys-NT, InteliMains-NT is available in IGS-NT Communication Guide (page 19)
InteliLite is available in Global Guide InteliLite AMF25 Global Guide (page 126)

I cannot connect to my controller using the Internet or AirGate connection, why?

Usually connecting to the controller over the internet is straightforward and works out of the box. However, there are a few parameters that need to be set correctly.

Make sure you have the latest firmware in the controller itself but also in all the communication modules (plug-in, built-in or external).
- Communication modules that supports connection via the internet
  - CM-4G-GPS
  - CM-Ethernet
  - CM-GPRS
  - InternetBridge-NT 4G
  - InternetBridge-NT
  - IB-Lite
  - IB-COM (Built-in communication module for NTC controllers)
  - IL-NT GPRS

Ensure the communication interface is configured correctly.
- CM-4G-GPS, CM-Ethernet, CM-GPRS - Can be set in the controllers setpoints on the unit itself or using InteliConfig configuration software.
- IB-COM, IB-Lite - Use web interface - just connect to http://<controller-ip-address>/sp_index.htm using your favourite web browser.
- InternetBridge-NT 4G, InternetBridge-NT - Requires a software tool called IBNTConfig(https://www.comap-control.com/products/detail/ib-nt-config) and an USB A<->B cable for configuration. This way you can also enable MODBUS, SNMP etc.

Make sure there is no firewall blocking your connection. Consult your IT specialist or ISP if not sure. If you use a firewall, make sure the following ports are open for communication:
- The device must be able to send data to the AirGate server at UDP port 6127 and TCP port 23. The TCP port can be changed in the module setup to 21 if needed.
- TCP port 44445 is required for WebSupervisor connection.
- Port 80 is used for accessing the communication module web interface.
- Port 502 is used for Modbus TCP communication (enabled by default).
- Port 161 is used for SNMP (needs to be enabled).

How do I change the controller firmware? Where can I get the latest firmware?

You can download the latest firmware package on the webpage of the device. You can easily navigate there through the ‘Products’ section or just use the Search function. If you cannot find the firmware on the website or if you require different than the offered version do not hesitate to contact our support team.

The firmware upgrade itself is easy to perform. You need the appropriate configuration software and a connection to the controller (preferably a direct connection). Prior to initiating the update process, we strongly recommend you to save a complete backup of your device.

It usually consists of several steps:

Create a controller back up.
Update the device firmware. It will contain default Configuration Archive and default Application.
Change the Application (SPtM, MiNT, MCB, MGCB, BTB, etc) to the required type (by programming appropriate default archive to the controller).
Use the Import Configuration Wizard to restore your previous configuration. In some cases manual interventions might be needed during this step.
Optional: Update the connected display firmware or device communication module firmware.

Should you be unsuccessful in programming the new version, the rollback procedure is to install previous firmware version and use your back up to restore the controller to its original state before the firmware upgrade was attempted.

Upcoming trainings

InteliGen 1000 & InteliConfig Familiarization (face-to-face course) Location: ComAp Control Limited, Unit 1B, Swallowfield Courtyard, Wolverhampton Road, Oldbury, West Midlands, B69 2JG Training fee: £200 per person Capacity: 6 participants Learn how to master ComAp´s advanced paralleling controller for complex applications, the InteliGen 1000. During the course, participants will explore the functuonalities and unique features of the InteliGen 1000 controller, and its integration with the InteliConfig configuration software. This hands-on training will help you get a practical experience in configuring, monitoring, and optimisng the performance of the InteliGen 1000 controller using our intuitive and easy-to-use software InteliConfig. Through practical applications and real-world scenarios, the participants will gain valuable insights into maximising the potential of this advanced paralleling controller.

InteliGen, InteliMains 1010 Marine

4 days 16 / 18 spots left

Prague

English

Power Generation

Single & Gen-set Controllers Training Location: Prague 7, U Uranie 1612/14a, 17000, Czech Republic Training fee: 220 EUR per person per day Capacity: 18 participants Single Gen-set Controllers Training First part of our training will provide the necessary resources to learn all about working with ComAp controllers and efficiently managing power systems for both newcomers seeking foundational insights and seasoned professionals aiming to fine-tune their skills. Engaging in collaborative learning experiences and hands-on practice, the participants will gain confidence in navigating the complexities of working with our InteliLite 4 family of controllers. Paralleling Gen-set Controllers Training Second part of the training takes a comprehensive approach, addressing complex configurations involving multiple generators in island or parallel operation. This program caters to participants at all stages of their professional journey, and it focuses on paralleling gen-set controllers including InteliGen 4 200, InteliGen 500 G2 and InteliGen 1000.

InteliLite, InteliGen, InteliNano, InteliSys

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

4 days 17 / 18 spots left

Prague

Czech

Power Generation

Single & Paralleling Gen-set Controllers Training Místo konání: U Uranie 1612/14a, Praha 7, 17000, Czech Republic Cena: 180 EUR/osoba/den/cena bez DPH Kapacita: 18 účastníků Single Gen-set Controllers Training První část školení je zaměřena na kontrolery ze skupiny InteliLite 4 . Účastníci se seznámí se základy řízení samostaných motorgenerátorů v ostrovním režimu nebo v zapojení paralelně se sítí. Paralleling Gen-set Controllers Training Druhá část školení je zaměřena na InteliGen 4 200, InteliGen 500 G2 a InteliGen 1000 kontrolery. Účastníci budou seznámeni se základy komplexních zapojení využívajících několik gen-setů v ostrovním provozu nebo zapojených paralelně k síťovém provozu. Po dokončení tohoto školení budete vědět, který výrobek společnosti ComAp vybrat, kde najít podrobné informace o používání produktu a jak nastavit řídící jednotku. Dále také získáte znalosti o rozšíření možností řídící jednotky pomocí příslušenství řídící jednotky ComAp, včetně informací o systémech vzdáleného monitorování a řízení.

InteliLite, InteliNano, InteliGen, InteliSys

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

4 days 18 / 18 spots left

Prague

English

Power Generation

InteliLite, InteliGen, InteliNano, InteliSys

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

2 days 6 / 6 spots left

Oldbury

English

Power Generation

InteliGen, InteliMains 1010 Marine

Webinar Recordings

InteliGen NTC GeCon Marine

A compact solution with built-in display and broad communication possibilities, the InteliGen NTC GeCon Marine offers great flexibility, protects the generator and optimises the number of running engines for more efficient marine operations.

The InteliGen NTC GeCon Marine offers:

Main functions: AMF function, Baseload, Import / Export, Peak shaving, Voltage and PF control (AVR)
ECU (Electronic Control Unit) support for the engine
Broad communication capabilities
Remote control, supervision and management
Gen-set performance log and event-based history for fast and easy troubleshooting
Automatic synchronisation and power control via speed governor or ECU
Measurement of both generator and mains side
Configurable inputs and outputs enabling customers to design functions according to their various needs
Controller redundancy minimising solution downtime and ensuring the power isn’t compromised
Integrated PLC programmable functions
Embedded fixed and configurable generator protection
Marine Power Management System
Digital VAr sharing, digital load sharing
Optimising the number of running engines
The controller has been certified by the following marine organisations: DNV, LR, ABS, BV, RINA, CRS, CCS

To run the GeCon software you need to order InteliGen NTC, and then install the correct GeCon software:

GeCon LandBased (included in standard firmware)
GeCon Marine (special dedicated marine firmware)
IGS-NT-LSM+PMS dongle (required for Load sharing and Power Management)

Related case studies

Case Studies

Backup Power for the National Football Stadium in Warsaw

Local support you can count on

Your operation depends on everything running smoothly. Our experts are here to make sure of that. We offer:

24-hour support on working days
Local contacts in 179 countries
Remote and in-person trainings and a range of support materials
Expert consultation, troubleshooting, and much more

CONTACT TECHNICAL SUPPORT

Contact your local ComAp representative

Didn't find what you were looking for? Contact us, we’ll be happy to answer any questions you may have and help you with your business needs.

See Local Contacts

Interested in another country? Find your local representative.

You might also need

InteliMonitor

WinScope

GenConfig

GenConfig is an intuitive software tool that enables quick and effective configuration and programming of IG/IS-NT controllers.

Alternative products

InteliGen NT BaseBox

InteliGen NTC BaseBox

InteliSys NTC BaseBox

Our website uses cookies and similar technologies to provide you the best experience and to understand how you use our site.

You may either „Accept all“ by which you agree with using functional, analytical and marketing cookies. By pressing „Revoke“ only necessary cookies shall be allowed to enable the website and applications function correctly.. To revoke your consent you can do it from footer menu in Change cookie preferences section.

You can find more information on the Cookie page and the Privacy section .

InteliGen NTC

Accessories

Related products

Substitute of

Frequently Asked Questions

Upcoming trainings

Webinar Recordings

Related case studies

Local support you can count on

Contact your local ComAp representative

You might also need

Alternative products

You need an account to access this content